Telenetics Flash Poll DSP9612 Fast Poll Analog Modems

The 9600bps multi-drop / multi-point lease line modem

TELENETICS DSP9612FP	TELENETICS DSP9612LV	TELENETICS DSP9612RM	TELENETICS MD9612FP

Raymar - Telenetics new DSP 9600 / DSP 9612 9600 bps, Fast Poll Modem is the ideal for use in industrial and harsh environmental applications.

KEY FEATURES

• Dual Mode: 9600/4800 bps and FSK, Bell202T 0-1800 bps
• Fast train modem equalizer with 23 msec RTS/CTS delay
• DSP design with automatic adaptive equalizer
• Leased line interface protected with heavy-duty surge protection
• Installs in the Raymar-Telenetics and Motorola RM16 Universal Data Shelf
• DSP9612FP Powered by 85-265 VAC, 85-400 VDC
• DSP9612-LV Powered by low voltage DC, 10-53VDC
• Designed to optimize communication links where high speed or where milti-point drops are necessary

PERFORMANCE & APPLICATION

The Telenetics FlashPoll DSP9612 is a dual mode, full-featured 9600 Fast Poll and Bell 202T leased line modem with the fastest training time in the industry: 23 msec RTS/CTS delay. Ideal for utility and industrial automation multi-drop applications, including SCADA systems, traffic automation, and oil & gas automation projects where an unlimited number of drops is desirable. The Telenetics DSP9612 is a standalone modem designed for 4-wire, full-duplex, or 2-wire, half-duplex operation over a voice-band leased line or private wire/unloaded metallic circuit. The modem design utilizes the latest digital-signal processing (DSP) technology to achieve high performance.

COMPATIBILITY

In FlashPoll Mode (9600/4800 bps), the Telenetics DSP9612 fastpoll employs Raymar - Telenetics ’ proprietary modulation and encoding scheme to achieve fast modem training time. In Bell 202T Mode, the modem is end-to-end and backward compatible with Bell 202T (0 - 1800 bps) modems.

OPTIMIZATION & CAPABILITY

The Telenetics DSP9612 fastpoll is Ideal for systems where fast response, short training time, and low throughput delay is required. The DSP9612 FlashPoll is optimized for fast receiver equalizer training and extremely low throughput delay. The dual mode capability allows the Telenetics DSP9612 fastpoll modem to communicate with existing Bell 202T (0 - 1800 bps) remote modems, which can then be upgraded at a later date to a Telenetics DSP9612 FlashPoll modem.

Ordering Information

Telenetics DSP 9612 Flash Poll Standalone

DSP9612FP	FP, 1200/4800/9600, LL, B202T&23 85-265VAC/400VDC, US
DSP9612FP-220	FP, 1200/4800/9600, LL, B202T&23 85-265VAC/400VDC, EU
DSP9612FP-220UK	FP, 1200/4800/9600, LL, B202T&23 85-265VAC/400VDC, UK
DSP9612-LV	FP, 1200/4800/9600, LL, B202T&23 10-53VDC, Term Block

Telenetics DSP 9612 Flash Poll Rackmount

DSP9612-RM	FP, 1200/4800/9600, LL, B202T&23 85-265VAC/400VDC, US
MD9612FP	FP, 1200/4800/9600, LL, B202T&V.23, PP-MP, MYRIAD RM

General Specifications

Data rate:	9600 or 4800 bps asynchronous, +1 % - 2.5%
Bell 202T Mode:	0 – 1800 bps asynchronous,
Data format:	8 or 9 data bits with 1 or more stop bits
Line requirement:	TELCO Voice band 4 or 2 wire leased line
Private metallic circuits:	26 to 19 AWG
Operating modes:	2-wire half-duplex or 4-wire full-duplex
Modulation:	QAM
Equalizer:	Automatic, adaptive
Training time:	RTS to CTS delay, 23 ms
Cable equalizer:	Fixed transmitter and receiver cable equalizer, selectable (each cable equalizer is half of a 25 K ft 24 AWG cable)
Power supply: Wide range switching power supply	85 to 265VAC, 50/60 Hz or 85 to 400VDC or Low Voltage Range 10 to 53 volts DC power - current draw - VDC at 240ma, 24VDC at 120ma, 48VDC 60ma see part numbers
Surge protection:	Provided at power line and leased line Up to 15KV (Standalone version)
Carrier loss recovery:	Built-in Train on Data (typically less than 30 sec)
Receiver Dynamic Range:	+3 to-30 dbm or-10 to -43 dbm (DIP switch selectable)
Operating Temperature:	-40C to +85C

Flash Poll™ DSP 9600 - DSP 9612 Modem
DSP9612FP / DSP 9612	85 to 265VAC, 50/60 Hz or 85 to 400VDC
DSP9612LV / DSP 9612	Low Voltage Range 10 to 53 volts DC
DSP9612RM / DSP 9612	Card modem fits the RM16M chassis (chassis can be 115VAC or 48VDC)

Mechanical Specifications

Enclosure		Aluminum with removable front and rear panel
Dimensions		5.70" wide x 8.30" long x 1.50" high
Weight		1.9LB
Interface connectors		Leased line: 4-position screw terminal. Data Terminal Equipment (DTE): DB-25 female connector
Configuration		switches are on the bottom for easy use