Raymar Telenetics Home
Home > Manufactured Products > RAD > Kilomux Subrate Multiplexers  
Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com
QUICK CONTACTS:
Request Information:
Fill out our Contact Form
Email Sales:
sales@raymarinc.com
Call US Sales:
(800) 695-1951
 
Call UK Sales:
+44-203-318-9029
 
Call Technical Support:
(800) 747-1522
 
International Sales & Support:
+1-916-783-1951
   (7am-5pm PST)

 

facebook follow us  twitter follow us

Kilomux 2100, 2104
Subrate Multiservice Multiplexers



   
Raymar RAD Kilomux Download Datasheet for
Kilomux 2100, 2104  

The Kilomux subrate multiservice multiplexers provide an efficient and cost-effective solution for integrating data, voice, fax, and LAN traffic over digital data services, leased lines, IP, ISDN, and other services. Access to the various services is provided over a variety of standard interfaces at data rates ranging from 9.6 kbps to 1,536 kbps.


The low overhead, minimal end-to-end delay and allocated bandwidth of the Kilomux – together with voice compression – ensure quality of service while maximizing utilization of the available bandwidth.


Main link modules

Many interfaces are available on the aggregate links for compatibility with digital data services worldwide. These include V.35, V.36/V.11, RS-530, V.24/RS-232, X.21, and G.703 codirectional. Built-in CSU/DSU, fractional E1/T1, fiber optic, ISDN terminal adapters, and TDMoIP are also available. Soft-selectable timing options from either the link or any channel are standard for all interfaces, as is support for control signals.


Standard 8-bit buffers on both the transmit and receive lines, as well as an optional on-board 256-bit satellite buffer, enable the use of any type of access media. These include leased lines, fiber, radio, microwave, and satellite links.


Timing options

Various timing options for both the link and the I/O channels assure integrity of data transfer in any application. DTE, DCE and external DCE clocking are supported by the main link (not applicable on G.703 or CSU/DSU).


I/O modules

I/O modules are available for many types of traffic. Low and high bit rate data (sync and async) channels can be combined with voice and fax circuits for maximum bandwidth utilization. Advanced technology in voice compression allows a choice between tollquality ADPCM, PCM or high quality, low bit rate compressed voice, at rates as low as 4.8 kbps. In addition, internetworking modules provide LAN (Ethernet) connectivity.


Any combination of up to four or 12 I/O modules can be configured in the Kilomux-2104 and Kilomux-2100 chassis respectively.


 

Features


     
• Connects to leased lines, IP, ISDN, radio, satellite, and DDS links
• Link data rates from 9.6 kbps to 1,536 kbps
• High quality, low bit rate voice/fax from 4.8 kbps to 14.4 kbps
• Two chassis types: – Kilomux-2100 with 12 I/O slots – Kilomux-2104 with four I/O slots
• Optional redundant power supply and link interface
• Supports up to 180 digital voice or fax channels and 96 analog channels in one box
• Supports up to 48 async or 24 sync data channels
• Drop-and-insert capability
• Ethernet IP/IPX router/bridge module for LAN connectivity
• Flexible timing options

 

 

 

 

 

© 2010-2011 RAYMAR INFORMATION TECHNOLOGY, INC. ALL RIGHTS RESERVED